Industrial & Construction Solutions

Speb 7 Adhesives has high cohesive strength at room and elevated temperature.

Application Industries:

• Upholstery (Chair / Sofa Manufacturing)
• Bus body (vinyl to plywood / hat-rack in and other areas)
• PVC flooring
• Carpet flooring
• Automobile industry
• Ducting
• Refrigeration industry
• Switchgear industry
• Leather works
• Domestic application
• Handicraft industry

Method of Use:

• Ensure that the surface to be bonded is clean and dry. Clean the surface thoroughly to remove any dirt, grease etc. Then apply the adhesive on both surfaces evenly and allow drying for 5-10 min or until just dry to touch. Now join both surfaces and press well for about 6-8 hours to get a strong and perfect bond. Care should be taken to avoid trapping of air during joining

Note:

• Workable bond strength of the joint will be achieved after sometime, but maximum strength will occur only after the solvent has completely evaporated, this takes between 12-24 hours depending on the porosity of the surface

Features and Benefits:

• Multi-purpose adhesive
• Ideal viscosity gives superior coverage
• Excellent bonding strength
• Does not contain benzene

Precautions:

• SPEB-7 Multipurpose should be stirred well before use. The lid of the container must be tightly closed after use and should be kept away from heat and direct sunlight

Pack Sizes:

• 50 ml, 100 ml, 200 ml 500 ml, 1 Ltr, 5 Ltr, 25 Ltr

Applications:

• SPEB-7 Multipurpose synthetic solvent-based adhesive is suitable for bonding various materials: Rexine to leather, rexine to foam, foam to foam, foam to wood, rubber to metal, rubber to rubber, rubber to canvas, rubber to rexine, leather to metal, leather to rubber, leather to PVC, leather to canvas, leather to leather, rexine to cardboard, rexine to canvas, cork to rubber, cork to leather, cork to metal as well as PVC floor tiles and carpet.

Additional Information:

• Delivery Time: 7days

SPEB-7 Spray Grade is specially developed for industries like upholstery; bus body where the quantity of adhesive used is high, in order to get better coverage, faster production, high bonding strength and faster bonding.

Applications:

• SPEB-7 Spray Grade is suitable for bonding materials to each other like foam to rubber, coir to canvas, as well as wood to plywood in the making of furniture like sofas, chairs and mattresses.

Application Industries:

• Upholstery ( Chair /Sofa Manufacturing)
• Mattress Manufacturing
• Bus body (Vinyl to Plywood /Hat-Rack / and other areas)

Methods of Use:

• Ensure that the surface to be bonded is clean and dry. Clean the surface thoroughly to remove any dirt, grease etc. Spray the adhesive on both surfaces evenly and allow drying for 5-10 mins or until just “dry to touch". Now join both surfaces and press well for about 6-8 hours to get a strong and perfect bond. Care should be taken to avoid trapping of air during joining.

Note:

Workable bond strength of the joint will be achieved after sometime, but maximum strength will occur only after the solvent has completely evaporated which takes between 12-24 hours depending on the

porosity of the surface

Features and Benefits:

• Spray able adhesive ensures productivity and superior coverage
• High heat resistant
• Good initial grab and fast bonding
• Does not contain benzene

Precautions:

• SPEB-7 SPRAY GRADE should be stirred well before use. The lid of the container must be tightly closed after use and should be kept away from heat and direct sunlight

Pack Sizes:

• 5 Ltr, 25 Ltr

SPEB-7 Premium SR-911 is a high bond multipurpose adhesive with a high cohesive strength. Applied in the below industries and many more where the bond strength required is high or the application is critical

Application:

• Foam / rubber foam / rexine / leather / fibre / glass / ceramic/ Coir / canvas / wood / plywood / metal / veneer /Laminated plastics / Cork / wood / chipboard / concrete / stone to each other
• PVC flooring / Woven carpets/ Vinyl Flooring / vinyl skirting on the wall
• Cloth to wood/ aluminum used for making gift/ jewelry boxes.
• Quick and strong bonding for Exhibition stands installation
• Products also find usage in Car & Gus Interiors

Application Industries:

• Laminate to Wood Plywood bonding
• Carpet Industry
• Footwear Industry
• Automobile Industry
• Exhibition Stand Building

Method of Use:

• Ensure that the surface to be bonded is clean and dry. Clean the surface thoroughly to remove any dirt, grease etc. Apply the adhesive on both surfaces evenly and allow drying for 5-10 mins or until just ‘c*’y to touch". Now join both surfaces and press well for about 6-8 hours to get a strong and perfect bond. Care should be taken to avoid trapping of air during joining

Note:

• Workable bond strength of the joint will be achieved after sometime, but maximum strength will occur only after the solvent has completely evaporated which takes between 12-24 hours depending on the
• porosity of the surface

Precautions:

• SPB-7 PREMIUM SR-911 should be stirred well before use. The lid of the container must be tightly closed after use and should be kept away from heat and direct sunlight.

Pack Size:

• 100 ml, 200 ml, 500 ml, 1 Ltr, 5 Ltr, 25 Ltr

Features and Benefits:

• Excellent bond strength
• Better productivity 8 high coverage
• No settlement
• Does not contain harmful Benzene