Item Code: BossGp122
BOSS 122 DESCRIPTION FOR GENERAL PURPOSE APPLICATIONS.
 
BOSS 122 RTV Silicone Sealant is an one part acetoxy cure adhesive sealant that is suitable for general construction sealing and adhesive applications. This product will adhere to clean metal, glass, many types of wood, silicone resins, vulcanized silicone rubber, ceramics and plastic surfaces. A primer may be required for optimum adhesion to some substrates. Cured sealant stays rubbery from -60°F to 400°F.
BOSS 122 RTV silicone sealants ideally suited for sealing , glass windows, shopfront, aluminium joints, showcases, bus body building and automobiles.
BENEFITS:

Ease of use, one-part sealant, no mixing required.

Good weatherability Virtually unaffected by sunlight, rain, ozone, and temperature extremes.

Long life reliability, cured sealant stays rubbery from -25 to 110°C without tearing,cracking, drying out, or becoming brittle.

Wide temperature gunnability can be applied in any season.

Typical PropertiesUncuredSpecific Gravity0.97±2ColorsClear, White, BlackSag/SlumpNILTack-Free Time10-15 minCureTime at 75°F (24°C) and 50% RH (3/8¢ thickness)24 hoursExtrusion Rate275 g/minCured PhysicalElongation>400%Durometer Hardness, Shore A, points17Tensile Strength, Mpa1.8Dynamic Movement Capability Cycled at 1/8' hr.,1/8min.%± 25
silicone sealant, high flow silicone sealant, ge sealant marine silicone, drum pump silicone sealant,,black silicone sealant waterproof, silicone sealant specialists, Anabond 666, silicone glazing sealant, food grade silicone sealant, silicone sealant specialties, silicone sealant drying time, structural silicone sealant, silicone rubber sealant, silicone sealant for fiberglass, aquarium silicone sealant, silicone boat sealant, flexible sanitary silicone sealant, high temp red Rtv silicone sealant, silicone sealant applicator tool, silicone joint sealant, silicone sealant for upvc windows, service temperature of silicone sealant, Silicone Sealant, Permatex High Temperature RTV Red, Boss 395 High Temperature Resistant Silicon Sealant, Boss 389 Weather Sealant, Silcon Sealant for ACP, Aluminum Composite Panel Sealant, Glass Sealant, Water Preventive Silicon, Dow Corning 732 siilcon Sealant, Engine Gasket Maker, Gear Box Sealant, Car Glass Silicon, Car Glass Adhesive, Automobile Silicon, Nail Free Silicon Sealant, Mirror Silicon Sealant, Mirror Adhesive, white Silicon Sealant, Black Silicon Sealant, H. T. Silicon Sealant, Anabond Silicon Sealants.

Item Code: Fasto-CA95

Item Code: Fasto-A172

Fasto A172 is high viscosity and high temperature thread locking compound. High viscosity allows its usage on fasteners size up to 1 1/2 ".

Features:

High viscosity

High temperature

Large fastener

Accurate composition

Eco friendliness

1-part polyurethane adhesive that hardens by humidity or spraying with a fine water mist. Good relationship between open time and press time.

LOCTITE UR 7228 is a solvent-free, moisture curing one component adhesive based on polyurethane. Designed for manufacturing of sandwich elements of porous substrates, which contain humidity. The substrates can be bonded to one another or to metals, laminated panels, various plastics, rigid foam made of polystyrene, polyurethane, PVC and others.

At room temperature and the required humidity in the joint sufficient strength will be obtained after approximately 2 to 4 hours. For faster curing LOCTITE UR 7228 can be cured in a heated press. Maximum temperature must not exceed 70degreeC.

Your benefits